How to Make a Father’s Day Mug
What You Need
Ceramic mugEnamel paint surface conditionerEnamel paintClear gloss glazePaintbrushes
Step-By-Step Instructions
Follow our easy instructions to make a DIY handprint mug for Father’s Day. This mug requires drying time, and depending on the paint, may need more than a week before it can be used.
Step 1: Prep Your Surface
Before you begin painting, wash your ceramic mug with soap and water, rinse well and let dry. While the mug is drying, set out newspapers or another protective material over your work surface.
Step 2: Prime Before Painting
Before you paint your design, apply a surface conditioner to the mug to help the paint adhere to the surface. To do this, use a flat brush to apply a coat of conditioner to the outside of the mug. Let the conditioner dry before you try to paint your mug. Don’t touch the cleaned and prepared surface.
Step 3: Apply Handprint
To add the child’s handprint to the mug, help them apply paint to the entire surface of their palm. Shake the paint bottle well and squeeze a dime-size dot of paint into the clean palm of your child’s hand. Use the flat brush to spread the paint, completely covering the entire palm and fingers. The paint should be fairly thick to make a good handprint. Once their hand is covered in paint, have them place their hand on the mug’s surface. Have them keep still while you press their palm and fingers down to create a complete handprint. Then have them lift their hand straight up from the mug to avoid smears. You may want to have a washcloth or paper towels on hand to wipe up most of the paint before they wash their hands.
Step 4: Apply Protective Gloss
Use a thin brush to write their name with enamel paint.Let the painted words and the handprint dry completely.When the design is completely dry, use a clean flat brush to apply a coat of clear gloss glaze over the painted surface.Let the glaze dry for one hour and apply a second coat.Wait 10 days before using or washing the mug, or the paint may come off.
